沒有天際龍
此Mod停止所有新出現的Skyrim Dragon生成,包括在Fast Travel上發生的隨機生成以及在固定位置生成的生成,例如某些Dragon Mounds,Word Walls等。
截圖 共 2 張
模組介紹 作者原文
此Mod停止所有新出現的Skyrim Dragon生成,包括在Fast Travel上發生的隨機生成以及在固定位置生成的生成,例如某些Dragon Mounds,Word Walls等。
無天際龍SE Mod
無需DLC。
“無天際之龍SE”試圖阻止所有無任務/無傷害的任務
龍被激活後產生。這包括隨機
快速移動產生的蟲卵,固定產生的蟲卵
位置,例如某些龍丘,字牆等。
它打算在涉及龍的所有任務之後使用
已經完成,因爲可能會產生什麼效果尚不清楚
在那些龍或任務上。
此Mod專爲已完成主
天際任務和太多龍煩惱
當他們快速旅行和探索時。實際上,如果
主要任務還沒有開始,這是非常
懷疑是否還會有任何飛龍
周圍,因此不需要此Mod,並且可能會崩潰
遊戲。
我嘗試過的其他“ No Dragon” Mod只能擺脫
隨機的龍。龍的具體位置,像一隻
在“ Bonestrewn Crest”仍在生成。
通過設置全局“ MQ106TurnOffRandomDragons”來實現
設置爲1,“ WINextDragon”設置爲1000.0,將所有“ encDragon0 *”更改爲
等級爲-1且健康等級爲1的條目,更改“ Paarthurnax”,
“ BlackreachDragon”,“ MQResurrectDragon1”,“ MQResurrectDragon2”,
“ MQResurrectDragon3”,“ MQ106Dragon”和任務“ WE03”,“ WE04”,
“ WE08”,“ WEJS18”和“ WIChangeLocation09”不阻止任務
並命名爲龍(但不能保證所有的龍
找到)。
但是,它並沒有擺脫產生的龍
在激活Mod並將其寫入保存之前
遊戲。這些龍全部消滅,甚至前進
比賽時間縮短30天不會將他們帶回來。禁用
Mod並加載已保存的遊戲,龍被清除
將立即開始再次生成它們。
說明:
將“ No Skyrim Dragons SE 1_1.7z”解壓縮到您的Skyrim安裝目錄中。
“ No Skyrim Dragons SE.txt”文件將解壓縮到安裝目錄。
“ No Skyrim Dragons SE.esp”文件將解壓縮到<installdir> / Data
目錄。
啓動Skyrim SE後,請確保“無Skyrim Dragons SE.esp”處於活動狀態。
除非加載了另一個有效的mod,否則加載位置無關緊要
會更改上面列出的任何參考。
變更日誌:
版本1.1
-進行了許多更改,以嘗試避免阻塞任務和命名的龍。
我的其他天際SE Mods:
重設所有位置-
新的慢速喊叫視覺-
慢速喊叫調整-
更多危險敵人-
Bullseye Perk癱瘓錯誤修復-
新的成爲虛幻的呼喊視覺-
不再因健康欠佳而屈膝-
就地癱瘓/復活錯誤修復-
我的舊天際Mod:
沒有天際之龍-http://www....rim/mods/61147/
Bullseye Perk癱瘓錯誤修復-http://www....rim/mods/61363/
慢速喊叫調整-http://www....rim/mods/39754/
新的慢速喊叫視覺-http://www....rim/mods/39748/
重設所有位置-http://www....rim/mods/39111/
更多危險敵人-http://www....rim/mods/42794/
新的成爲虛幻的呼喊視覺-
不再因健康低下而屈膝-
就地癱瘓/復活錯誤修復-
——————————————————————————————————
No Skyrim Dragons SE Mod
No DLCs are required.
"No Skyrim Dragons SE" attempts to stop any non-quest/unamed
dragon spawns after being activated. This includes random
spawns that occur on fast-travel and spawns at fixed
locations, like certain Dragon Mounds, Word Walls, etc.
It is intended to be used after all quests which involve dragons
have been completed as it is unknown what effect it might have
on those dragons or quests.
This Mod is designed for those who have finished the main
Skyrim quest and are being annoyed with too many dragons
when they are fast-traveling and exploring. In fact, if
the main quest has not even been started, it is very
doubtful that there will even be any dragons flying
around, so this Mod is not needed and will likely crash
the game.
Other "No Dragon" Mods I have tried only get rid of the
random dragons. The specific location dragons, like the one
at "Bonestrewn Crest" still spawn.
It does this by setting global "MQ106TurnOffRandomDragons"
to 1 and "WINextDragon" to 1000.0, changing all "encDragon0*"
entries to Level 1 with -1 Health, changes "Paarthurnax",
"BlackreachDragon", "MQResurrectDragon1", "MQResurrectDragon2",
"MQResurrectDragon3", "MQ106Dragon", and quests "WE03", "WE04",
"WE08", "WEJS18", and "WIChangeLocation09" to not block quest
and named dragons(but it is not guaranteed that all have been
found).
It does not, however, get rid of dragons that had spawned
before the Mod was activated and were written into the saved
game. After all these dragons are eliminated, even advancing
the game time by 30 days will not bring them back. Disabling
the Mod and loading a saved game with the dragons cleared out
will immediately start spawning them again.
Instructions:
Extract "No Skyrim Dragons SE 1_1.7z" to your Skyrim install directory.
The "No Skyrim Dragons SE.txt" file will extract to the install directory.
The "No Skyrim Dragons SE.esp" file will extract to the <installdir>/Data
directory.
Upon starting Skyrim SE, ensure that the "No Skyrim Dragons SE.esp" is active.
It shouldn't matter where it loads unless there is another active mod
that alters any of those references listed above.
Changelog:
Version 1.1
- Made many changes to try and keep from blocking quest and named dragons.
My Other Skyrim SE Mods:
All Locations Reset -
New Slow Time Shout Visual -
Slow Time Shout Tweaks -
More Dangerous Enemies -
Bullseye Perk Paralyze Bug Fix -
New Become Ethereal Shout Visual -
No Mor …
安裝與使用 安裝:按包內說明操作
- 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
- 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
- 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
- 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。
不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。