手動Cross重裝SSE

作者 JZbai·版本 v1.0·更新於 2019-11-30

JZbai的cross模型已移植到sse!

截圖 共 1 張

模組介紹 作者原文

JZbai的cross模型已移植到sse!

普通cross可能會令人討厭,對嗎? 開槍後,您必須在裝填武器時慢慢嘗試避開敵人。 但是,由於有了這個mod,您現在可以隨時重新加載! 沒有更多的自動重裝。

當您首次安裝此mod進行加載時,此mod將箭袋和螺栓袋添加到您的庫存中,並且還添加了將在魔術部分顯示的重新加載功率。 不用注意SKSE警告,它只會在您第一次加載mod時發生。

我所做的基本上就是解壓縮jzbai的最新版本的mod,使其更輕鬆地與sse一起使用,並在創建工具包中運行esp。 所有的功勞歸於Jzbai,請務必查看天際聯繫上的Original mod。

對於那些不喜歡弓功能的人,我跳入SSEedit並製作了一個不包含手動重裝箭袋的版本。 通常它可以在SKYUI中禁用,但在這種情況下,我被迫即興創作

____________

Normal crossbows can be annoying, right? After firing your shot you have to slowly try to avoid your enemies as you reload. But thanks to this mod, you can now reload whenever you want! No more automatic reload.

This mod adds a quiver and bolt pouch to your inventory when you first load in with this mod installed, it also adds a reload power that will be in the magic section. Don't pay attention to the SKSE warning, it only happens the first time you load in with the mod.

All i've basically done is unpack jzbai's latest edition of the mod to work with sse more smoothly, and run the esp in the creation kit. All credit goes to Jzbai and be sure to check out the Original mod on the skyrim.

For those who dislike the bow functionality i hopped into SSEedit and made a version that doesn't include a manual reload quiver. Usually it could just be disabled in SKYUI but in this case im forced to improvise

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
  3. 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
  4. 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。

不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。

檔案與校驗

檔案名稱
手动Cross重装SSE
檔案大小
46.3 KiB