Bijin-使用CBBE網格和紋理

作者 Amki45·版本 v3.0·更新於 2020-05-28

一個MOD,其功能類似於所有Bijin Mod的合併補丁,並允許所有Bijin使用與您相同的紋理和網格以及新的FaceGen新數據,從而避免頭頸部和身體之間出現任何顏色差異。

截圖 共 4 張

模組介紹 作者原文

一個MOD,其功能類似於所有Bijin Mod的合併補丁,並允許所有Bijin使用與您相同的紋理和網格以及新的FaceGen新數據,從而避免頭頸部和身體之間出現任何顏色差異。

你好

所以我在和平地玩《天際》時,只是想起了Bijin NPC具有適當的網格和紋理,如果要更改它們,則必須複製/粘貼它們。我很沮喪,現在我發佈了mod:-)

此mod的行爲就像是所有Bijin Mod的合併補丁(NPC,Warmaidens,Wifes,+或-Serana&Valerica // //必須全部禁用ESP),並且不包含任何身體/手/腳引用。因此,遊戲將使用您已經安裝並想要的身體/手/腳網格和紋理。還包含FaceGen數據,以避免頭/頸部和身體之間的任何顏色差異(在安裝過程中,請閱讀每個選項的說明)。

您不需要任何AIO,只需將上面列出的所有模塊都列出即可

除Serana-100重量版本外,所有Serana版本均可用。 (如果需要,我將其添加)

安裝故障排除:

在安裝完所需的所有Bijin mod之後,請安裝此mod(MO2 / Vortex用戶:只需確保在所有Bijin mod之後加載了該mod)

需要禁用所有Bijin mods ESP,僅應啓用我的esp

確保在安裝過程中選擇相同的正確選項

如果您爲一個或多個NPC安裝了另一個替換程序,只需確保它包含FaceGen數據並在此Mod之後加載/安裝mod和esp。

隨意提出屏幕截圖。

用於截圖的模組:

純CBBE-4k版本

魯迪ENB SE

——————————————————————————————

Hi,

So I was playing peacefully playing Skyrim and just remembered that Bijin NPCs have their proper meshes and textures and if I wanted to change them I would have to copy/paste them. I get upset and now I publish a mod:-)

This mod acts like a merged patch of all Bijin Mods (NPCs, Warmaidens, Wives, + or - Serana & Valerica // THEY'RE ALL REQUIRED BUT THEIR ESPs MUST BE DISABLED) and also contains no body/hands/feet references. So the game use the body/hands/feet meshes and textures that you have installed and that you want. Also contains FaceGen data to avoid any color difference between head/neck and body (read the description of each options during installation).

YOU DON'T NEED ANY AIO ONLY THE MODS QUOTED ABOVE AND THIS ONE

All Serana's versions are available EXCEPT for the Serana-100-weight version. (If it's requested, I'll add it)

Installation troubleshooting:

Install this mods after installing all Bijin mods you want (MO2/Vortex users: just make sure that it is loaded after all Bijin mods)

All Bijin mods ESPs needs to be disabled, only my esp should be enabled

Make sure that you choose the same correct options during installation

If you have installed another replacer for one or more npcs just make sure it contains FaceGen data and load/install both mod and esp after this mod.

Feel free to propose screenshots.

Mods used for screenshots:

The Pure CBBE - 4k Version

Rudy ENB SE

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
  3. 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
  4. 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。

不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。

檔案與校驗

檔案名稱
Bijin-使用CBBE网格和纹理
檔案大小
24.8 MiB