更好的法術成本疊加
使法術消耗降低的結界值成倍增加。
截圖 共 2 張
模組介紹 作者原文
使法術消耗降低的結界值成倍增加。
在香草中,降低法術費用的結界可以使您輕鬆地降低100%的法術費用。沒有咒語費用,魔法戰鬥就變成了不斷地向最有效的咒語發送垃圾郵件。
降低法術成本變得更加有效,您已經擁有的成本降低幅度更大。如果您沒有降低結界的結界,則添加降低20%結界的結界將使您的法術費用按預期減少20%(100%-> 80%的費用)。但是,如果您已經降低了60%的成本並添加了另一個降低20%的結界,則您的法術成本將比以前降低50%(40%-> 20%成本)。
使用此mod,成本降低成倍增加,因此,無論您已經降低多少成本,它們都一樣好。現在,增加一個降低20%成本的結界可以使咒語費用始終比以前降低20%。
要求:
SKSE
安裝:
如果您安裝在現有的存檔上,則需要爲盔甲重新配備相關的結界,以使Mod正常工作。
解除安裝:
不建議您卸載腳本化的mod,這樣做的後果自負。
爲確保將降低的法術費用恢復爲原始水平,您應遵循以下步驟:
在控制台中輸入:
將JMCR_Uninstall設置爲1
您將收到一個確認框,並且該模塊已禁用。現在,您應該立即保存並退出遊戲。卸載mod(不僅禁用.esp),然後使用腳本清理器清理您的保存。
——————————————————————————
In vanilla, spell cost reduction enchantments allow you to easily get 100% spell cost reduction. Without spell costs, magic combat turns into spamming the most effective spells over and over.
Spell cost reduction becomes more effective, the more cost reduction you already have. If you do not have any enchantments with cost reduction, adding an enchantment with 20% cost reduction will reduce your spell costs by 20% as expected (100% -> 80% cost). However, if you already have 60% cost reduction and add another enchantment with 20% cost reduction, your spell costs will be reduced by 50% compared to before (40% -> 20% cost).
With this mod, the cost reductions stack multiplicatively, so that they are equally good, regardless of how much cost reduction you already have. Now, adding an enchantment with 20% cost reduction will always reduce spell costs by 20% compared to before.
Requirements:
SKSE
Installation:
If you install on an existing save, you need to re-equip armor with relevant enchantments for the mod to work correctly.
Uninstallation:
Uninstalling scripted mods is not recommended, so do at your own risk.
To ensure, the spell cost reductions are reverted to vanilla, you should follow these steps:
Type in the console:
set JMCR_Uninstall to 1
You will get a confirmation box and the mod is disabled. Now you should immediately save and quit the game. Uninstall the mod (not just disable the.esp) and clean your save with a script cleaner.
安裝與使用 安裝:按包內說明操作
- 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
- 這類遊戲沒有通用的模組管理器:有的模組直接替換遊戲檔案、有的放進遊戲專屬的 Mods 資料夾、有的要先裝遊戲對應的社群載入器或工具,以包內說明為準。
- 嚴格按說明放置檔案;標註「前置依賴」的模組需要把依賴一併裝好。
- 啟動遊戲確認載入成功;部分遊戲需要在設定或模組選單裡手動啟用。
不同遊戲、不同模組的安裝位置差異很大,包內說明是最可靠的依據。