SwappableStaysail

版本 v1.2.1·更新於 2026-10-05

Makes staysails removable and reinstallable as portable packages, and adds a Sail Maker mode to the shipyard menu for buying spare staysails.

模組介紹 作者原文

SwappableStaysail

Disclaimer: This mod is made with ChatGPT 5.6 Sol

Removable & Swappable Staysails

  • Any staysail attached to a stay can now be removed by pressing R once the sail is fully furled.
  • Removing it creates a physical sail package that can be carried and moved around.
  • The package is named using the stay name + sail name + sail size.
  • The package retains the sail's weight.
  • To install a staysail, hold its package, aim at its assigned stay, and press R.
  • Different staysails can be swapped on the same stay.
  • Each sail package is bound to the stay it was created for and cannot be installed on a different stay.
  • The package remembers the sail's position on that stay, so it will return to the same position regardless of where you aim on the stay when installing it.

Sail Maker

  • You can enter sail maker mode in shipyard, the button is above clean ship.
  • It opens a specialized shipyard where you can configure staysails only.
  • Your mast and stay layout must therefore be set up in the normal Shipyard first.
  • Once you have selected the desired staysail type, size, and position, click Buy Staysail in the bottom-left corner.
  • A sail package will be generated beside the Sail Maker scroll.
  • You can buy multiple different staysails for the same stay, carry them aboard, and swap between them during a passage.
  • Press the sail maker button again to switch back to shipyard
  • If you install your staysail high up the stay and you don't have crow's nest, you might need a little parkour on stay to take it out.

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 多數模組依賴遊戲的模組載入器:常見做法是用社群模組管理器(如 r2modman)選中本遊戲安裝,由管理器自動處理載入器與依賴。
  3. 手動安裝時,把模組檔案放進遊戲目錄下對應的 Mod / plugins 資料夾。
  4. 啟動遊戲確認載入成功;帶「前置依賴」的模組需要把依賴一併安裝。

不同模組的安裝位置差異較大,包內說明是最可靠的依據。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack

檔案與校驗

檔案名稱
SwappableStaysail-1.2.1.zip
檔案大小
153.2 KiB