Loaders Heavy Slam
Makes Loader's Thunderslam scale Size, Damage and Knock-Up based on fall speed
模組介紹 作者原文
Loader's Heavy Slam
Makes the Loader's Thunderslam more satisfying.
What does this mod do?
It makes Thunderslam's Radius, Damage and Knock-Up Force scale with downwards speed.
How is this calulated?
By default when Thunderslam is activated you gain -100 velocity in the y axis (i.e. Downwards). When we hit the ground, we take the absolute value of that speed and fed into the formula for calculation.
The Formula
newValue = (value baseCoefficient) + ((value baseCoefficient) (speed / 100) valueCoefficient)
Where:
- value = the normal value that would be used (e.g. 210 for damage)
- speed = the velocity in the y axis (100 for each second falling)
- valueCoefficient = the coefficient as specified in the config (e.g. 0.478 for damage by default)
- baseCoefficient = the coefficnet as specified in the config (by default always 1)
Notes:
- speed may be reduced by the minimal speed if specified in the config
Changelog
1.0.2
- Added the ability to finish Thunderslam mid-air, highly customizable via configs
1.0.1
- Added the ability to scale base values (
- Added particle scaling for speed (can be disabled)
1.0.0
- Initial Release
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
前置依賴
下面這些內容需要先安裝，否則該模組不會生效：
bbepis-BepInExPacktristanmcpherson-R2APIRiskofThunder-HookGenPatcher