VehicleTools
Press F1 to open the vehicle toolbox and configure extended vehicle features. This mod mainly lets your friends ride on vehicles too, with extra cargo, jump, speed limit, and vehicle protection featur
模組介紹 作者原文
載具工具箱 / VehicleTools
REPO 遊戲交流 QQ 羣:824639225
支持 R.E.P.O. 最新 v0.4。
Scroll down for English ↓
💡 快速乘車/下車指南
爲了防止玩家在推車、整理物資時誤觸上車,模組設計了高精度的防誤觸掛載邏輯,請按照以下方式乘車:
- 抓取中後部:用物理手套抓取車輛的中後部、兩側車廂欄板、或車尾部位(抓取車頭或引擎蓋屬於駕駛區,無法上車)。
- 原地靜止2秒:抓車後原地保持絕對不動 2 秒(或您在 F1 面板中設置的時間),即可自動被吸附上車。
- 亂動即作廢:抓車等待期間,如果您發生了任何明顯的走動或推車位移,本次計時將立即作廢。若想再次上車,必須鬆開抓取鍵,重新抓車並保持靜止。
- 如何下車:在布娃娃狀態下,抓取一下車輛即可瞬間下車。
⚙️ 核心功能說明
按下 F1 即可打開載具工具箱,集中設置各種載具擴展功能。這個模組的主要用途是讓好友也能坐上車,同時提供載貨、跳躍、限速、車輛保護等輔助功能。
- 👁️ 優化駕駛視角
- 駕車時視角高度平滑升高(提供2.2米開闊高視野),下車自動還原。
- 採用平滑插值過渡,杜絕瞬間瞬移,車輛行駛與顛簸時具備高水平防抖表現。
- 👥 載人掛載系統重構
- 禁止載人:僅允許駕駛員上車,強力攔截其餘乘客的乘車請求。
- 左右懸掛:前 5 位乘車玩家掛載在載具左側外壁,後續掛載在右側外壁,依次排開。
- 疊羅漢(默認):乘客掛載在車頂正上方,並垂直依次向上疊加,形成滑稽的疊羅漢效果。
- 頭頂旋轉:所有人懸掛在車頂並繞中軸均勻公轉,每個人面向圓周外側。
- 抓車後靜止上車(防誤觸):抓取車身中後部或兩側車廂,並保持原地不動即可自動吸附掛載;單次物理抓取只有一次靜止判定機會,抓車期間有任何相對位移本次抓取即宣告作廢,必須放開重新抓車靜止方可上車,徹底杜絕推車和拿取貨箱物資時的誤觸。在布娃娃狀態下再次抓車即可瞬間下車。
- 強制防衛蹲姿:乘車掛載狀態下強制乘員每幀下蹲最底部,乘車姿態端正。
- 默認最多乘車人數爲 10 人。
- 🏎️ 載具限速與跳躍
- 雙重限速攔截:可自定義調整最高限速值,採用物理層速度剪裁,默認最大限速已由舊版 45 提升至 55 km/h。
- 載具跳躍機制:支持按空格跳躍、空中連續跳躍、跳躍冷卻調節以及跳躍後翻車保護,默認跳躍力爲 40。
- 🚛 載貨車專屬增強
- 庫存限制調節:支持開啓自定義庫存價值限制(上限默認 50k)。徹底解決了修改限額超限後車子罷工不吸貨,以及超載物品堵在吸附口導致車門反覆抽風開關門的 Bug。
- 無視物品大小限制:大型物品也可強行放入載貨車貨箱。
- 吸取範圍倍率:支持 1.0倍 - 10.0倍 範圍調節載貨車自動吸附貨物的物理範圍。
- 智能自動生成載貨車:支持每局開局自動生成載貨車(限主機/單機)。優先在場景內的玩家出生點(SpawnPoint)生成,防止車子刷出地圖外的 Bug,並限制只在正式遊戲關卡中生效。
- 🏟️ 死亡競技場與賽車模式防干擾(功能靜默禁用)
- 自動場景感知識效:當檢測到當前處於賽車比賽(Race)或死亡競技場王冠賽(Crown/Arena)中時,Mod 所有的核心功能(限速、跳躍、掛載、刷車、傳送等)會自動靜默失效。
- 純淨原版競技(F1仍可開啓):物理與位置修改補丁全部跳過(完全迴歸官方原生物理規則),防墜崖及防爆傳送保護在此期間不介入;但 F1 控制面板依然能在局內隨時按鍵正常開啓與查看。
- 🎨 現代高對比度控制面板
- 高級交互滑塊與實心亮綠方塊複選框,精細描邊分區,帶一鍵重置。
- 配置項隱藏與自動持久化,快捷鍵組件支持左右箭頭“切換式”軟限制選擇。
- F1 面板只管理運行時功能,模組總開關僅保留在遊戲內模組菜單。
多人聯機只需主機安裝。若客機也安裝了同樣的模組,可通過網絡實現參數同步。
兼容性
與其他載具限速或掛載類模組加載時可能有衝突提示,建議只保留 VehicleTools。
按鍵
| 按鍵 | 功能 |
| --- | --- |
| F1(可配置) | 打開 / 關閉車輛工具箱面板 |
| 空格鍵 (Space) | 載具跳躍 (需在面板中開啓) |
配置
BepInEx/config/zichen.vehicletools.cfg,版本更新後自動重置。
| 分組 | 配置項 | 默認值 | 說明 |
| --- | --- | --- | --- |
| B.全局設置 | 模組啓用 | true | 總開關 |
| B.全局設置 | 工具箱按鍵 | F1 | 呼出控制面板快捷鍵 |
English
A comprehensive in-game vehicle tool panel for R.E.P.O. Host-only installation required. If clients have the same mod installed, config parameters will sync automatically. Press F1 anywhere (including Main Menu, Lobby, Loading, In-Game, and Pause Menu) to open the control panel.
💡 Quick Start: How to Mount / Dismount
To prevent unwanted mounting during vehicle pushing or item handling, a precise anti-accident logic is implemented. Follow these steps:
- Grab Rear/Sides: Grab the rear bumper, tail cargo box, or side walls of the vehicle with your physics gloves (grabbing the front hood/front cabin is reserved for driving and won't trigger passenger mounting).
- Stay Still for 2s: Keep completely still for 2 seconds (or the time configured in the F1 panel) to auto-mount.
- Move to Cancel: If you move or walk during grabbing, the timer is instantly disqualified. To try again, you must release the grab key and grab it again while staying still.
- How to Dismount: While in ragdoll state, grab the vehicle once to dismount instantly.
Features
- Optimize Driving Camera: Smoothly raises camera height when driving with interpolation and high stabilization.
- Redesigned Mounting Modes:
- No Passengers: Only the driver is allowed to get on board.
- Sides: Mounts passengers on left/right outer walls.
- Totem (Default): Mounts passengers vertically stacked on top of the vehicle roof.
- Head/Top Rot: Mounts passengers above the roof, rotating while looking outwards.
- Still-To-Mount (Anti-Accident): Grab the rear/sides of the vehicle and keep still to auto-mount. Moving during grabbing instantly disqualifies the current session; you must release and grab again while staying still to mount, preventing unwanted mounting during pushing or cargo handling. Grab it again to dismount.
- Enforced Crouch: Automatically forces seated avatars into a crouch pose.
- Default maximum passenger count is 10.
- Speed Limiter & Jumping: Custom maximum speed limiter with physical speed clamping. Default maximum speed has
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: