SuperScanner
Press F to scan items, valuables, enemies, weapons, carts, vehicles, and dead teammates. Supports Chinese and English. REPO遊戲交流QQ羣:824639225
模組介紹 作者原文
超級掃描儀 / Super Scanner
REPO 遊戲交流 QQ 羣:824639225
支持 R.E.P.O. v0.4。
Scroll down for English ↓
功能說明
- 超級掃描儀:按下掃描按鍵後,會顯示附近的貴重品、裝備武器、隊友、推車、裝飾箱、車輛和怪物,默認持續顯示 5 秒。
- 信息共享隊友:自己按下掃描時,只要物品距離自己不超過 15 米,就會自動觸發遊戲原生的發現共享,即使隊友未安裝該模組也能收到屏幕方框特效提示。
- 觸發方框顯示:開啓後,每次按下掃描,只要距離自己在 15 米以內的物品都會再次觸發遊戲原生的發現方框,無視遊戲原版每局僅觸發一次的限制。
- 隊友局內掃描:支持掃描隊友位置,並在頭頂顯示名字和距離,自動通過多級反射兼容其他改名 Mod。存活和死亡隊友均可獨立控制開關,隊友標籤以最高優先級排列。
- 車輛與載具掃描:新增車輛掃描(賽車 / 載貨車)並帶獨立開關,完美掌控全圖載具分佈。
- 掃描探索模式:默認關閉;關閉時直接顯示名稱,開啓後貴重品 4 米內、其他掃描目標 6 米內、怪物 20 米內前統一顯示?。
- 怪物靠近自動顯示:怪物進入靠近自動顯示距離時,會自動臨時顯示怪物標籤。
- 本地化與多語言:支持中英文無縫切換,除隊友名字不作處理外,所有掃描顯示的文字(如 Unknown Item / 未知物品 等)均實現本地化。
- 界面優化:已被拉入推車或提取點的物品/裝飾箱不會重複顯示;死亡、觀戰或禁用狀態下不會響應掃描。
默認行爲
- 掃描按鍵默認爲 F,最大掃描距離 15 米。
- 掃描標籤字體大小爲 26。顯示米數默認開啓。
- 隊友掃描默認開啓,存活隊友顯示默認關閉,死亡隊友顯示默認開啓。
- 車輛掃描默認關閉,推車掃描默認關閉。
- 觸發方框顯示默認開啓。
配置說明
| 分組 | 配置項 | 默認值 | 說明 |
| --- | --- | --- | --- |
| A.模組信息 | 語言 / 模組名稱 / 模組版本號 | 自動檢測 / - / 當前版本 | 語言可下拉切換中英文;名稱和版本號爲只讀條目 |
| B.全局設置 | 模組啓用 | 開 | 關閉後整個模組所有顯示和補丁立即失效 |
| B.全局設置 | 敵人名字優化 | 開 | 僅中文模式生效,使用更順口的中文暱稱;英文模式始終用英文 |
| C.掃描設置 | 啓用 / 信息共享隊友 / 掃描探索模式 / 顯示米數 / 觸發方框顯示 / 字體大小 / 掃描按鍵 / 掃描冷卻/秒 / 掃描距離/米 | 開 / 開 / 關 / 開 / 開 / 26 / F / 1 / 15 | 控制全局掃描設置。開啓 觸發方框顯示 後,每次按下掃描,只要距離自己在 15 米以內的物品都會再次觸發遊戲原生的發現方框。 |
| D.貴重品掃描 | 啓用 / 顯示名稱 / 顯示價格 | 開 / 開 / 關 | 控制貴重品掃描標籤顯示與內容 |
| E.隊友掃描 | 啓用 / 存活隊友 / 死亡隊友 | 開 / 關 / 開 | 在掃描儀上顯示隊友的位置和名字,自動適配其他改名 Mod。存活隊友默認關閉,死亡隊友默認開啓。排序優先級最高。 |
| F.裝備武器掃描 | 啓用 / 顯示名稱 | 開 / 開 | 控制槍、近戰、血包、手雷等裝備武器的掃描 |
| G.裝飾箱掃描 | 啓用 | 開 | 顯示關卡中的投幣機、硬幣寶箱、代幣箱和裝飾箱 |
| H.推車掃描 | 啓用 / 顯示推車 / 顯示小推車 | 關 / 開 / 開 | 推車掃描控制,帶總開關。 |
| I.車輛掃描 | 啓用 / 顯示賽車 / 顯示載貨車 | 關 / 開 / 開 | 車輛掃描控制,帶總開關。 |
| J.怪物掃描 | 啓用 / 啓用靠近自動顯示 / 靠近自動顯示距離/米 | 開 / 開 / 30 | 怪物掃描控制,支持靠近時自動臨時顯示 |
English
Supports R.E.P.O. v0.4.
Super Scanner is a client-side HUD overlay and scan enhancement mod for R.E.P.O. that displays nearby valuables, gear, teammates, carts, vehicles, and enemies.
Features
- Master Scanner: Activate scanning to show nearby valuables, weapons/gear, teammates, carts, decor boxes, vehicles, and enemies. Labels persist for 5 seconds by default.
- Teammate Info Sharing: Automatically triggers native screen-edge discover notifications for your team if scanned items are within 15 meters, even if your teammates do not have this mod installed.
- Always Trigger Share: When enabled, every scan will re-trigger the native discover border effect on valuables and decor boxes within 15 meters, ignoring the game's once-per-level limitation.
- Teammate Scanning: PERSISTENTLY shows teammate positions with their names and distance above their heads, utilizing reflection to safely support name-changing mods. Separately toggle alive and dead teammate displays. Teammate labels are prioritized at the top of the scan list.
- Vehicle Scanning: Persistent overlay for kart and cargo vehicles with individual toggles.
- Explore Mode: When enabled, shows? on labels until you get close enough (4m for valuables, 6m for other items, 20m for enemies). Off by default.
- Proximity Enemy Display: Enemies automatically show up when they enter your proximity auto-show distance, even if you are not actively scanning.
- Localization: Full English/Chinese localization for all scan-related text (except player names).
- Optimization: Items inside shopping carts or extraction points are hidden to prevent UI clutter. Scan is suspended while dead, spectating, or disabled.
Default Behavior
- Scan key is bound to F, scan range is 15 meters.
- Font size is 26. Distance display is enabled by default.
- Teammate scanning is on by default, with dead teammate labels shown and alive teammate labels hidden.
- Vehicle scanning and shopping cart scanning are off by default.
- Always Trigger Share is enabled by default.
Settings
| Group | Setting | Default | Description |
| --- | --- | --- | --- |
| A.Mod Info | Language / Mod Name / Mod Version | auto-detect / - / current | Language can be switched between Chinese and English; other items are read-only |
| B.Global | Mod Enabled | On | Disables every feature and patch when off |
| B.Global |
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: