BetterReviveExperience
Host-only inventory and held-item protection with configurable extraction, truck, cart, shop, and held-head revives.
模組介紹 作者原文
BetterReviveExperience
⚠️ 兼容性警告 / Compatibility Warning
請勿同時啓用其他提供自動復活、死亡背包保留、手持物品防掉落或自動回收功能的模組。對於 GameTools 等多功能模組,請關閉其中與 BRE 重疊的選項。
Do not enable other mods that provide automatic revives, keep-inventory-on-death, held-item drop protection, or automatic item recovery. For multi-purpose mods such as GameTools, disable the options that overlap with BRE.
中文 | English
中文
BetterReviveExperience 是一款僅需房主安裝的 R.E.P.O. 復活與物品保護模組,加入房間的其他玩家無需安裝。
安裝
- 使用 r2modman 或 Mod Manager 安裝。
- 依賴 BepInExPack 和 REPOConfig。
- 在 Mods → BetterReviveExperience 中修改設置,修改後建議重啓遊戲。
功能
- 死亡後保留原版背包欄物品。
- 可收納物品(Phase Bridge、無人機、武器等)因受擊或翻滾脫手時自動回到原版背包;死亡時也會優先回收。
- 手持物品時切換到已佔用的背包格,會交換物品而不是將手中物品扔到地上。
- 支持提取點、卡車、推車、商店和房主持死亡玩家的頭按鍵復活。
- 可設置復活條件、團隊費用、復活血量和快捷鍵。
設置
| 設置 | 默認值 | 作用 |
|---|---:|---|
| KeepItemsOnDeath | 開啓 | 死亡後保留背包欄物品 |
| ProtectHeldItems | 開啓 | 受擊或翻滾時回收可收納的手持物品 |
| SwapHeldItemOnOccupiedSlot | 開啓 | 切換到已佔用格時交換物品 |
| ReturnHeldItemOnDeath | 開啓 | 死亡時回收手持的可收納物品 |
| Mode | ExtractionOrTruck | 設置提取點和卡車復活規則 |
| Cost | 0 | 每次復活扣除的團隊貨幣,範圍 0–100000,步進 1000 |
| HealthPercent | 25 | 復活後的血量百分比 |
| EnableHeldHeadRevive | 開啓 | 房主持死亡玩家的頭按鍵復活 |
| HeldHeadReviveKey | H | 可選 H、R、Y 或 F |
| EnableCartRevive | 開啓 | 死亡玩家的頭進入推車後復活 |
| EnableShopRevive | 開啓 | 在商店死亡後復活 |
| DebugLogging | 開啓 | 輸出詳細診斷日誌 |
Mode 可選:
- Disabled:關閉提取點和卡車自動復活。
- ExtractionMachineActivated:死亡玩家的頭進入提取點,並在機器激活後復活。
- ExtractionOrTruck:死亡玩家的頭進入提取點或卡車區域後立即復活。
注意
- 請在遊戲原生設置中開啓 Item Unequip Auto Hold,否則從背包取出的物品會在短暫計時後掉落。
- 擴展背包格不受支持;使用擴展背包模組時,請在原版前三格中至少留一個空格。
- 原版前三格全滿時,死亡時手持的物品會放到死亡玩家的頭附近。
- 團隊貨幣不足時不會復活,也不會扣費。
- 團滅、開新局或重置存檔時不保證保留物品。
English
BetterReviveExperience is a host-only revive and item-protection mod for R.E.P.O. Other players joining the lobby do not need to install it.
Installation
- Install with r2modman or Mod Manager.
- Requires BepInExPack and REPOConfig.
- Change settings under Mods → BetterReviveExperience; restarting the game afterward is recommended.
Features
- Keep vanilla inventory-slot items after death.
- Return storable items such as Phase Bridge, drones, and weapons to vanilla inventory after an impact or tumble, and recover them on death.
- Swap the held item into an occupied inventory slot instead of dropping it.
- Revive through extraction points, the truck, carts, the shop, or the host's held-head hotkey.
- Configure revive conditions, team cost, revive health, and hotkey.
Settings
| Setting | Default | Purpose |
|---|---:|---|
| KeepItemsOnDeath | On | Keep inventory-slot items after death |
| ProtectHeldItems | On | Recover storable held items after an impact or tumble |
| SwapHeldItemOnOccupiedSlot | On | Swap items when selecting an occupied slot |
| ReturnHeldItemOnDeath | On | Recover a storable item held at death |
| Mode | ExtractionOrTruck | Set extraction-point and truck revive rules |
| Cost | 0 | Team currency per revive, 0–100000 in steps of 1000 |
| HealthPercent | 25 | Health percentage after revive |
| EnableHeldHeadRevive | On | Let the host revive the held death head |
| HeldHeadReviveKey | H | Choose H, R, Y, or F |
| EnableCartRevive | On | Revive when a death head enters a cart |
| EnableShopRevive | On | Revive after dying in the shop |
| DebugLogging | On | Write detailed diagnostic logs |
Mode options:
- Disabled: disable automatic extraction-point and truck revives.
- ExtractionMachineActivated: revive after the death head enters an extraction point and the machine is activated.
- ExtractionOrTruck: revive immediately when the death head enters an extraction point or truck area.
Notes
- Enable the native Item Unequip Auto Hold game setting, or inventory items will drop after the temporary grab timer expires.
- Expanded inventory slots are not supported. Keep at least one of the first three vanilla slots free when using a bag-expansion mod.
- If all three vanilla slots are full, the item held at death is placed near the death head.
- A revive is not performed or charged when team currency is insufficient.
- Items are n
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: