LC Room attribution prediction experiment
對房主所屬國家進行推測
模組介紹 作者原文
LC_Room_attribution_prediction_experiment
Lethal Company 公開房間地區識別模組 / Public Lobby Region Detection Mod v1.5.1
功能概述 / Overview
在 Lethal Company 的公開房間列表中,自動分析每個房間創建者的國家/地區,並在房間名稱前顯示地區標籤和完整概率分佈。
Automatically analyzes the country/region of each lobby creator in Lethal Company's public lobby list, displaying region tags with full probability distribution before the lobby name.
純客戶端模組,未安裝此模組的人可以正常與安裝了此模組的人一起遊戲。
Client-side only mod - players without this mod can play normally with those who have it installed.
示例效果 / Example Display
中文顯示模式 / Chinese Display Mode(需安裝字體 / requires font installation):
[中國] 78% | 日本 7% | 韓國 6% | 其他 5% 小肥羊's Crew ← 中國玩家創建 / Chinese player
[歐美] 18% | 其他 34% | 美國 18% | 墨西哥 12% girls only ← 歐美玩家創建 / Western European player
[俄羅斯] 55% | 烏克蘭 12% | 東歐 10% | 其他 10% альтушка с 3 рязмером ← 俄羅斯玩家創建 / Russian player
[挪威] 91% | 其他 9% Dine 800hr+ No reset ← 挪威玩家創建 / Norwegian player
[中國] 78% | 日本 7% | 韓國 6% | 其他 5% 蝙蝠開塞露 ← 中國玩家創建 / Chinese player
英文縮寫模式 / Abbreviation Mode(默認,無需字體 / default, no font needed):
[CN] 78% | JP 7% | KR 6% | OTHER 5% 小肥羊's Crew
[WEST] 18% | OTHER 34% | US 18% | MX 12% girls only
[RU] 55% | UA 12% | EE 10% | OTHER 10% альтушка с 3 рязмером
標籤顏色會根據置信度變化 / Tag color changes based on confidence:
- 🟢 綠色 Green (≥80%): 高置信度 / High confidence
- 🟡 黃綠 Yellow-Green (60-80%): 中高置信度 / Medium-high confidence
- 🟠 橙色 Orange (20-40%): 低置信度 / Low confidence
- ⚪ 灰色 Gray (\steamapps\common\Lethal Company\BepInEx\plugins\LethalCompanyRegionTag.dll
- (可選)安裝中文字體以顯示中文標籤 / (Optional) Install Chinese font for Chinese labels:
\steamapps\common\Lethal Company\BepInEx\plugins\LethalCompanyRegionTag\chinese_font_ui.ttf
將 chinese_font_ui.ttf(微軟雅黑字體)放入 BepInEx/plugins/LethalCompanyRegionTag/ 目錄 / Place chinese_font_ui.ttf (Microsoft YaHei font) in BepInEx/plugins/LethalCompanyRegionTag/ directory
中文字體支持 / Chinese Font Support
模組默認使用 ASCII 縮寫顯示(如 [CN]、[RU])。如需顯示中文名稱(如 [中國]、[俄羅斯]),需要安裝字體。
The mod defaults to ASCII abbreviations (e.g., [CN], [RU]). To display Chinese names (e.g., [中國], [俄羅斯]), font installation is required.
方法 1:手動安裝字體(推薦)/ Method 1: Manual font installation (recommended)
- 創建目錄 / Create directory:BepInEx/plugins/LethalCompanyRegionTag/
- 將 TTF/OTF 格式的中文字體文件放入該目錄 / Place TTF/OTF Chinese font file in that directory
- 模組啓動時會自動掃描並加載 / Mod will auto-scan and load on startup
方法 2:安裝漢化模組 / Method 2: Install Chinese localization mod
- 安裝任何包含 CJK 字體的漢化模組,本模組會自動檢測並使用其字體 / Install any localization mod with CJK fonts, this mod will auto-detect and use its font
方法 3:放置字體到遊戲根目錄 / Method 3: Place font in game root directory
- 將字體文件放到遊戲根目錄,模組也會自動掃描 / Place font file in game root directory, mod will auto-scan
驗證安裝 / Verify Installation
啓動遊戲後,查看 / After launching the game, check BepInEx/LogOutput.log:
[Info: BepInEx] Loading [TAIGU-Room recognition experiment 1.0.0]
[Info:TAIGU-Room recognition experiment] [TAIGU] Successfully patched: SteamLobbyManagerPatch
[Info:TAIGU-Room recognition experiment] [TAIGU] TAIGU-Room recognition experiment v1.0.0 loaded!
[Info:TAIGU-Room recognition experiment] [TAIGU] Region detection enabled: Nickname=True, SteamAPI=False
[Info:TAIGU-Room recognition experiment] [TAIGU] RegionTagManager initialized
配置說明 / Configuration
首次運行後,會在 / After first run, config file is generated at BepInEx/config/TAIGU.RoomRecognition.cfg:
[Analysis Sources]
啓用暱稱語言分析(無需網絡,始終可用)
Enable nickname language analysis (no network required, always available)
EnableNicknameAnalysis = true
啓用 Steam 社區頁面查詢(無需 API Key)
Enable Steam Community page query (no API Key required)
EnableCommunityQuery = true
啓用 Steam XML 資料查詢(兜底方案)
Enable Steam XML profile query (fallback method)
EnableXmlQuery = true
Steam Web API Key(可選,最準確)
Steam Web API Key (optional, most accurate)
從 / Get from:
SteamWebApiKey =
[Display Settings]
最低置信度閾值(低於此值不顯示標籤)
Minimum confidence threshold (tags below this won't be shown)
MinConfidenceThreshold = 20
是否顯示無法識別地區的標籤 [??]
Whether to show t
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: