BetterScanVision
Light your way through the darkness with every scan. Highly configurable.
模組介紹 作者原文
Light your way through the darkness with every scan. Highly configurable.
Night Vision Parameters
Night Vision Duration
Sets the night vision's duration in seconds. A higher number means an extended night vision duration; a lower number means a decreased night vision duration.
Default: 0.490
Acceptable Values: 0.001 - 1.300
Night Vision Range Maximum Scalar
Scales the night vision's maximum range in relation to the vanilla night vision's range. A higher number means an extended night vision range at the scan's peak; a lower number means a decreased night vision range.
1 = unchanged; 0 = disabled
Default: 2.800
Acceptable Values: 0.000 - 1000.000
Night Vision Intensity Maximum Scalar
Scales the night vision's maximum intensity in relation to the vanilla night vision's intensity. A higher number means an extended night vision intensity at the scan's peak; a lower number means a decreased night vision intensity.
1 = unchanged; 0 = disabled
Default: 10.000
Acceptable Values: 0.000 - 1000.000
Night Vision Color
Sets the night vision's color in the form of a hex color code (\"RRGGBB\"). Alpha values will be discarded.
Default: "0E154C"
Outdoors Night Vision Parameters
Outdoors Night Vision Range Scalar
Scales the night vision's range while outdoors. A higher number means an extended night vision range while outdoors; a lower number means a decreased night vision range.
1 = unchanged; 0 = disabled
Default: 150.000
Acceptable Values: 0.000 - 1000.000
Outdoors Night Vision Intensity Scalar
Scales the night vision's intensity while outdoors. A higher number means an extended night vision intensity while outdoors; a lower number means a decreased night vision intensity.
1 = unchanged; 0 = disabled
Default: 12.000
Acceptable Values: 0.000 - 1000.000
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝，否則該模組不會生效：