TripleJump
A New Tool For Triple Jump
模組介紹 作者原文
三段跳工具/TripleJumpTool
語言/Language
- 中文
- English
中文
三段跳(嬌小玩偶)
該mod給空洞騎士絲之歌添加一個新的黃色工具,裝備後可以使用三段跳。
✨ 功能
- 裝備 “嬌小玩偶” 後,在空中使用二段跳後可以再次按下跳躍鍵執行三段跳。
- 與原版移動機制無衝突,不影響衝刺、蹬牆跳等其他動作(下批,登牆不刷新三段跳bug已解決,二段跳衝刺時不能三段跳已解決)。
- 使用三段跳需要擁有二段跳和滑翔(若提前獲取裝備沒這兩個技能也不能增加一次跳躍)。
- 獲取方式:第三幕觸發後,前往費耶山山頂獲取二段跳的琴前面,有一個可拾取的光點,拾取即可獲得嬌小玩偶。
📥 安裝
- 確保已安裝 BepInEx 和 Needleforge
- 將本模組文件夾解壓至遊戲目錄下的 BepInEx\plugins 文件夾中。
⚙️ 配置
模組的參數可由mod文件夾內的 TripleJump.json 文件控制。你可以用任意文本編輯器修改其屬性。
默認配置文件
{
"Name": "嬌小玩偶",
"Desc": "由天空飄落的羽毛編織的雪靈玩偶,可加強供奉者的能力。\n\n增加一次跳躍能力。",
"Type": "Yellow",
"Icon": "TripleJump.png",
"MapID":"Peak_08b",
"Position":[281,102],
"state":"act3_wokeUp"
}
配置項說明
- Name:工具名稱,可自定義。
- Desc:工具描述,可自定義。
- Type:工具類型,紅,黃,藍。
- Icon:工具圖標,可自定義圖標文件名,建議144x144像素左右,或者直接改我的圖標(太小會顯示一小個圖標,太大沒嘗試,我是直接用的其他工具圖標改的)。
- MapID:地圖ID,在哪個地圖生成改工具(Peak_08b爲費耶山山頂)。
- Position:工具生成的座標,在地圖中的座標([281,102]爲獲取二段跳的琴的位置)。
- state:玩家狀態,當玩家擁有該狀態時才能觸發(act3_wokeUp爲第三幕開始後)。
English
Triple Jump (嬌小玩偶)
This mod adds a new yellow tool to Hollow Knight: Silksong. Once equipped, you gain the ability to perform a third jump in the air.
✨ Features
- With the "嬌小玩偶" equipped, press the jump button again after a double jump to execute a triple jump.
- No conflicts with the original movement system — dashes, wall jumps, and other actions are unaffected.
(Fixed: wall grabs no longer incorrectly reset triple jump; fixed: triple jump is now usable right after a dash double jump.)
- Triple jump requires both the double jump ability and the glide ability. (Acquiring the tool early won't grant an extra jump if these skills are missing.)
- Acquisition: After Act 3 begins, head to the top of Mount Fay, right in front of the harp that grants the double jump. A glowing pickup will appear — collect it to obtain the Petite Doll.
📥 Installation
- Make sure BepInEx and Needleforge are installed.
- Extract the mod folder into the game's BepInEx\plugins directory.
⚙️ Configuration
The mod’s parameters are controlled by the TripleJump.json file inside the mod folder. You can edit it with any text editor.
Default configuration file
{
"Name": "嬌小玩偶",
"Desc": "由天空飄落的羽毛編織的雪靈玩偶,可加強供奉者的能力。\n\n增加一次跳躍能力。",
"Type": "Yellow",
"Icon": "TripleJump.png",
"MapID":"Peak_08b",
"Position":[281,102],
"state":"act3_wokeUp"
}
Configuration options
- Name:Tool name, can be customized.
- Desc:Tool description, can be customized.
- Type:Tool type, red, yellow, or blue.
- Icon:Tool icon, can be a custom icon file name, but it's recommended to be 144x144 pixels or larger, or you can replace it with my icon (too small will display a small icon, too large I haven't tried).
- MapID:Map ID, where to generate the tool (Peak_08b is the peak of Fay).
- Position:Tool position, in the map's coordinates ([281,102] is the position of the harp that grants the double jump).
- state:Player state, only when the player has this state can the tool be triggered (act3_wokeUp is the third act).
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: