StunDisplay

版本 v0.1.0·更新於 2025-11-11

Displays the stun state of bosses

模組介紹 作者原文

Stun Display

A Hollow Knight: Silksong mod that displays the stun state of bosses.

By default, it is shown at the lower center of the scrren as Stun: X/Y Combo: Z U/V, where:

  • X is the current stun accumulation value;
  • Y is the value required for boss to be stunned;
  • Z is the value required if in combo;
  • U is the current combo time left;
  • V is the total length of the combo timer.

An additional indicator is shown when the boss is stunned, or when its stunning is disabled.

硬直顯示

一個《空洞騎士:絲之歌》模組,可以顯示 Boss 的硬直狀態。

默認在屏幕正下方顯示爲 硬直:X/Y 連擊:Z U/V,其中:

  • X 爲當前的硬直累計值;
  • Y 爲使得 Boss 硬直所需的累計值;
  • Z 爲連擊時所需的累計值;
  • U 爲當前剩下的連擊計時;
  • V 爲連擊計時的總時長。

當 Boss 硬直時,或其硬直被禁用時,將相應地顯示。

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack_Silksongsilksong_modding-I18Nflibber-CanvasUtil

檔案與校驗

檔案名稱
StunDisplay-0.1.0.zip
檔案大小
37.9 KiB