Godhome

版本 v1.0.3·更新於 2025-09-16

Boss Scene Loader for Silksong

截圖 共 1 張

模組介紹 作者原文

Loads Boss Scenes in your save, without effecting your progress.

Warning: This mod could corrupt your save data, use at your own risk!

How to use:

While this mod is loaded, no data will be saved, to prevent corruption or loss of progress in case of using on a main save. If you would like to enable saving, please first disable or remove this mod from your plugins folder.

The default key to open the menu is B. You can change the keybind by going to the BepInEx config folder and replacing the Key listed under Toggle Menu. The Key listed is case-sensitive, and must be a Capital Letter, example: Toggle Menu = L will set the keybind to L.

It is highly recommended to use the 100% save file provided in the zip, to prevent causing issues.

Selecting a Boss will take you to the closest point to the Boss that can be achieved purely through Scene Loading. This in most cases will take you straight to the boss, but there are some exceptions. "Safe Zone" is a bench scene to allow you to configure your loadout, or heal.

  • Install Guide

Unzip the mod, take the Godhome.dll and place it in your BepInEx plugins folder. (Hollow Knight Silksong\BepInEx\plugins)

There is a save file in the folder, that is recommended to use with this mod. You can replace or add this save in any of the 4 slots by going to %userprofile%\appdata\LocalLow\Team Cherry\Hollow Knight Silksong and changing the save id, by default the slot it replaces is 3.

  • Work in Progress

This mod is actively under development, you may encounter issues or problems whilst using it, there are changes coming soon.

  • Dependencies

BepInEx-BepInExPack_Silksong-5.4.2303

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack_Silksong

檔案與校驗

檔案名稱
Godhome-1.0.3.zip
檔案大小
256.2 KiB