Universal FTRCharm Attachment
An experimental charm attachment to put on all guns. Charms don't waggle though, so cameras were added for compensation!
截圖 共 2 張
模組介紹 作者原文
Click the image below for the YouTube Video Demonstration
Universal Charm Attachment
An experiment that I scrapped last year, brought back to life with a redeeming addon.
Never came to be because the charms won't waggle when attached. I couldn't figure out why, and was too hesitant to replace the waggle parts with other components. Instead, this charm holder attachment acts as a camera tool, with weapon focused Catcher cams!
To activate the camera, toggle near the end of wherever the charm is facing. To turn on/off the charm holder, toggle the trigger directly above the holder.
This tool is using Cityrobo's PlaceAnywhere Interface, so to move the holder, hold down the shoulder / firing button while grabbing the attached charm holder. To reset its position, toggle up on the joystick while holding the charm holder.
The attachment is bi-directional, so if you attach it in reverse, you mirror the cameras for different angles.
I have no plans on fixing the missing waggle, however, if someone wants to come and one-up me by having a charm holder attachment with waggles, be my guest! For now, the primary purpose of this mod is to be a camera adding tool for quick cinematic shots.
If you still want to add charms to your guns, check out my charm pack here! --
Updates
V1.1.0 -- Charm Catcher Cams update.
Made the static cams more z-centered, for better orientation on both sides of the gun.
Standardized all cameras for 45 degrees, rather than the random inputs I had, because some would not allow rules of third.
Removed low clipping planes so that the gun would not get occluded with certain angles
Added dynamic cameras for even cooler clip potential!
V1.1.1
Dynamic Cam 1 is now full 360 rather than the half 180
V1.2.0
Added two more charm holders hosting more cameras.
Y set having environmental cameras, in which the charm isn't actually an attachment but a floating prop. Facing upwards, the trigger to enable cameras is above, while the trigger to turn of the meshes is off to the side.
Z set hosting a whole bunch of dynamic cameras, this charm attachment hosts dolly effect cameras and wacko animated cameras.
Originally this was to be kept to myself but I changed heart along the way.
V1.2.1 -- Forgot to upload the readme, whoops
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝，否則該模組不會生效：