TwinStickArmSprint

版本 v1.1.5·更新於 2025-12-14

Twinstick movement, but swinging your arms adds speed. Alternate mode: Head-Based Armswinger

截圖 共 1 張

模組介紹 作者原文

TwinStick Arm Sprint

This is based on Potatoes' Twin Stick Swinger ( The main difference is that swinging your arms _only increases speed_, without affecting direction. It's similar to movement in Blade & Sorcery.

There's also another mode called "Head-Based Armswinger" that's like regular Armswinger (no TwinStick), except that it uses head-based direction instead of controller-based direction. You will always go in the direction that you're facing.

NOTE: REPLACES ARMSWINGER MOVEMENT MODE

Due to issues caused by replacing Dash movement mode, this mod replaces Armswinger mode instead. It uses a combination of TwinStick options and Armswinger options.

For TwinStick Arm Sprint mode, the following settings are respected

  • TwinStick Options:
  • Movement Speed
  • Controller Forward/Side Root
  • TwinStick Left/Right Handedness
  • TwinStick Jump
  • ArmSwinger Options:
  • ArmSwinger Jump
  • _ArmSwinger Turning Mode_

You can also use the Global Movement Options, like setting the buttons to turn or jump.

For TwinStick Arm Sprint mode, the following settings are _ignored_

  • TwinStick Options:
  • _TwinStick Turning Mode_
  • TwinStick Sprint Mode
  • TwinStick Sprint Toggle Mode
  • ArmSwinger Options:
  • ArmSwinger Base Speed (Left Hand)
  • ArmSwinger Base Speed (Right Hand)

For Head-Based Armswinger mode, it only respects _ArmSwinger_ options

TwinStick Arm Sprint Usage

  • Go to Wrist menu > Set Move Mode > TS Arm Sprint.
  • Use the analog stick (or touchpad on some controllers) on the movement hand to move around as in TwinStick mode.
  • Swing your arms to sprint. It doesn't matter which way you swing them. The faster you move, the faster you go!

Head-Based Armswinger Usage

  • Change modes as shown below in the Config section.
  • Go to Wrist menu > Set Move Mode > Head Armswinger.
  • Look in the direction you want to go. Press the ArmSwinger button(s) to move and swing your arms to speed up.

Notes

  • Use _ArmSwinger Turning Mode_ to control the turning mode.
  • If you have ArmSwinger Jump enabled, raise both controllers above your head to jump.
  • (TwinStick Arm Sprint only) If you have TwinStick Jump enabled, press down on the analog stick on the offhand to jump.
  • (TwinStick Arm Sprint only) Your max speed with the analog stick is set by the _TwinStick Movement Speed_ option.

Config

  • Default is TwinStick Arm Sprint mode.
  • The game must be run at least once with the mod enabled in order for the config file to be created.
  • To change modes, edit the config file. You can use the mod panel in the game, or edit dll.h3vr.odekak.twinstickarmsprint.cfg in the Config folder. R2modman has a "Config editor" option.

Fixed Issues

  • Several bugs were fixed compared to Twin Stick Swinger. Jump now works fine, whether you use TwinStick jump or Armswinger jump. Also, there's no awkward momentum issue when going down stairs.
  • Also, stick-based turning (smooth and snap) now works on Oculus/Meta controllers.

Credits

  • potatoes1286 - For making a great mod and for sharing the code on GitHub
  • Alexine - For reporting issues and being a great tester

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

BepInEx-BepInExPack_H3VR

檔案與校驗

檔案名稱
TwinStickArmSprint-1.1.5.zip
檔案大小
90.7 KiB