Trijicon 6x48 ACOG
Chonky ACOG scope for MG gunners!
模組介紹 作者原文
Trijicon ACOG 6x48 Rifle Scope
One of Trijicon's entry into the big boy scope. The 6x magnification ACOG is meant for large caliber rifles and machine guns, well mostly machine guns such as the 240B but that didn't deter lots of people turning it into a DMR style scope.
The ACOG takes an additional picatinny rail at the top, for additional optic mountings. The scope is relatively large and definitely not something to lug around much but for a machine gunner scope, this was relatively fine in fixed positions.
Features
- Trijicon's BAC Rifle scope, featuring 6x magnification!
- Changes brightness by turning the scope
- Allows windage and elevation adjustments via the caps on the top and side (I know they're just safety caps but let's pretend)
- Sadly no other colour option due to the way the script is setup
- Can be found in Attachments > Scope
Thank you Tweedy for the support!
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
前置依賴
下面這些內容需要先安裝，否則該模組不會生效：
devyndamonster-OtherLoadercityrobo-OpenScripts2