NeoStead 2000

版本 v1.0.0·更新於 2026-02-17

A blocky polymer bullpup shotgun from South Africa, the iconic NeoStead 2000 breaks all the rules.

截圖 共 1 張

模組介紹 作者原文

NeoStead 2000

Straight outta South Africa at the turn of the century, the NeoStead 2000 is an extremely atypical shotgun. Like the KSG-12, for example, it feeds from twin magazine tubes; however, to add to the craziness, they're mounted above the barrel! Also, it's a pump-forward shotgun. Because why not? The NeoStead can be set to fire from each mag tube individually by manipulating the switch at the top of the mag tube assembly or (by setting the switch to the central position) can be set to feed in an alternating pattern, giving you 12 uninterrupted shots! Just mind the shitty sight radius.

Features

  • NeoStead 2000 (polymer brick of shotgun! Slap the mag closed! Found under tube-fed shotguns in the item spawner)

Limitations

  • Dual-feed mode is slightly jank, so it'll only swap mags when you fire a round (let's just say it's recoil-operated). This means repeatedly pumping it will only eject rounds from one mag. It also means that if you have a different number of shells in each tube, you'll hit a snag when one of them runs dry since you swap to an empty mag. Be careful!

Attributions

Model is from Survarium*.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

devyndamonster-OtherLoadercityrobo-OpenScripts2

檔案與校驗

檔案名稱
NeoStead_2000-1.0.0.zip
檔案大小
10.6 MiB