KA52drivable

版本 v1.1.1·更新於 2022-09-01

Brrrrrrtx2

模組介紹 作者原文

Kamov KA-52 (Drivable)

"Better than one person."

——JerryAr-Offline

The Fifth driavble helicopter is here,with a 30mm auto cannon controlled by pilot themselves,and several screens.

(Auto cannon will point to where the pilot head is looking,)

(aiming limit:30°from middle to right,and 15°+85°from top to the bottom)

click the the door on the left side to open it and click to get into Pilot position;door on the right side to CPG position

First turn on the BATTERY(white toggle button on front middle panel),

then hold the ENGINE|START(two red levers) for about 1 second and the engine should be turned on.

grab the stick and collective pitch then take off and have some fun.

to use KA52's weapons,distance grab the little joystick in the middle of the cockpit to fire the cannon,

grab the pilot's HUD to fire the missile and controll it with the little handle on the right side of the HUD

(red toggle button on the left side it the missile power switch).

missile must be loaded after every launch by throwing the little missile prefab into the left side missile launcher

(this looks unreal but it's the best I can do I'm sorry).

Notice

It's TnH ready

still WIP so may glitch sometimes, the player view won't rotate with the aircraft,maybe one day I could fix that.

Change Log

1.0.0 Added KA-52 in Misc--->TippyToy.

1.0.1 Fixed glitching screen.

1.1.0 Updated HD cockpit models.

1.1.1 Gears switch now have functions,click to rise or lower the gears.

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

devyndamonster-OtherLoaderWFIOST-H3VRUtilitiesnrgill28-RemoteC4Drone

檔案與校驗

檔案名稱
KA52drivable-1.1.1.zip
檔案大小
117.7 MiB