KA50drivable
Brrrrrrt
模組介紹 作者原文
Kamov KA-50 (Drivable)
"Fuck its gunnery."
——JerryAr-Offline
The Third driavble helicopter is here,with a 30mm auto cannon controlled by 'relyable' AI,and a little TV(IT-23).
(Screw the AI, now cannon will point to where the pilot head is looking,)
(grab the ABRIS screen on the right side of the front panel to fire)
(aiming limit:30°from middle to right,and 15°+85°from top to the bottom)
click the the door on the left side to get into pilot position.
First turn on the BATTERY(white toggle button on right side panel),
then hold the ENGINE|START(just grab the left side panel) for about 1 second and the engine should be turned on.
grab the stick and collective pitch then take off and have some fun.
Notice
It's now TnH ready,because I fired the AI and now player have to control the cannon themselves.
still WIP so may glitch sometimes, the player view won't rotate with the aircraft,maybe one day I could fix that.
Change Log
1.0.0 Added KA-50 in Misc--->TippyToy.
1.0.1 Abandoned AI, changed the aiming mode to head tracking(AI only for auto fire).
1.0.2 Changed the gun to manually firing HE shells,be careful.
1.0.3 Fixed some bullet display issue.
1.0.4 Fixed issue that made sound source keeps focus on the plane.
1.0.5 Changed landing gear models and reworked colliders.
1.1.0 Added S8 rocket nests, distant grab the HUD in the middle pannel to fire rockets.
1.1.1 Fixed glitching screen.
1.2.0 Updated HD cockpit model.
1.2.1 Now pilot need to open the left door to enter the KA-50.
1.2.2 Gears switch now have functions,click to rise or lower the gears.
1.3.0 Added a KA-50 varient which have flight model,combined flight system and weapon system into same stick and throttle.You can press 'E' and 'D' to toggle cameraview between playerbody and cockpit.
安裝與使用 安裝:BepInEx 外掛
- 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
- 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝,否則該模組不會生效: