HuntBornheimNo3Silencer

Hunt: Showdown Bornhiem No 3 Silencer

The Bornheim No 3 Silencer chambered in 7.62x25mm from Hunt: Showdown!

Uses a 5 round clip and can be loaded with an extra round on top on the bolt itself.

This is kind of an odd gun to use, so it may take a bit getting used to.

To load the gun it requires a clip, or you can load a single bullet in the chamber if you're missing the clip itself. You must load the clip into the side door by opening it by grabbing the right side hatch and pushing it open similar to an LMG top cover, the magazine hatch can be closed the same way it was opened, now you can rack the slide to chamber a round, or pull back the slide while holding the mag release button to lock the slide back and add an additional 6th round on top.

The clip ejects from the bottom once empty through the slot in the receiver. You can reload the clip with a fresh one once it has fallen out, or if you lock the slide back and feed bullets in from the top.

To eject the clip early, simply open the magazine hatch again after completely closing it once you've loaded it. In real life this is a spring loaded mechanism so it had to be tweaked to be usable in VR.

BORNHEIM NO. 3 SILENCER (See also, BORNHEIM NO. 3) In hopes of courting lost military contracts, this silencer modification was first developed to combat complaints that the Bornheim No. 3's large magazine encouraged wasting ammunition. Suppressed gunshot sounds did incentivize more precise aiming due to the slightly reduced bullet power, but they also allowed wielders to fire without betraying their position—thus making them even more wasteful with their ammunition.

Features

• Hunt: Showdown sounds
• Stock mount
• 5+1 ammo capacity

ObjectID List

• bitwizrd.HuntFirearm.BornheimNo3Silencer

Metadata

• Era: WildWest
• Year Introduced: 1896
• ModTags: BitWizrd, Hunt: Showdown

Spawner Menu

• Firearms/AutomaticPistol