HuntBornheimNo3
The Bornheim No 3 chambered in 7.62x25mm from Hunt: Showdown! Physical magazine hatch opening added!
模組介紹 作者原文
Hunt: Showdown Bornhiem No 3
The Bornheim No 3 chambered in 7.62x25mm from Hunt: Showdown!
Uses a 5 round clip and can be loaded with an extra round on top on the bolt itself.
This is kind of an odd gun to use, so it may take a bit getting used to.
To load the gun it requires a clip, or you can load a single bullet in the chamber if you're missing the clip itself. You must load the clip into the side door by opening it by grabbing the right side hatch and pushing it open similar to an LMG top cover, the magazine hatch can be closed the same way it was opened, now you can rack the slide to chamber a round, or pull back the slide while holding the mag release button to lock the slide back and add an additional 6th round on top.
The clip ejects from the bottom once empty through the slot in the receiver. You can reload the clip with a fresh one once it has fallen out, or if you lock the slide back and feed bullets in from the top.
To eject the clip early, simply open the magazine hatch again after completely closing it once you've loaded it. In real life this is a spring loaded mechanism so it had to be tweaked to be usable in VR.
BORNHEIM NO. 3. (See also, SEMI-AUTOMATIC PISTOLS) The futuristic-looking Bornheim No. 3 was one of the first semi-automatic pistols, featuring a five-round magazine. Named for a village incorporated into the city of its design, the No. 3 only ever achieved limited commercial success as an armament. Its designer, Louis Schmeisser, would go on to design many other more successful and innovative firearms. As the number designates, this was the third model, which was designed to compensate for certain shortcomings realized at Swiss, German, and Belgian military trials. This featured a sturdier design and stouter barrel, as well as an enhanced magazine which could be fed by stripper-clip.
Features
- Hunt: Showdown sounds
- Suppressor mount
- 5+1 ammo capacity
ObjectID List
- bitwizrd.HuntFirearm.BornheimNo3
Metadata
- Era: WildWest
- Year Introduced: 1896
- ModTags: BitWizrd, Hunt: Showdown
Spawner Menu
- Firearms/AutomaticPistol
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝，否則該模組不會生效：