HuntAltarBoy

版本 v1.0.5·更新於 2026-10-11

The Lebel 1886 in the Altar Boy legendary skin chambered in 8mm Lebel from Hunt: Showdown! With 8+1+1 loading functionality!

模組介紹 作者原文

Hunt: Showdown Altar Boy

The Lebel 1886 in the Altar Boy legendary skin chambered in 8mm Lebel from Hunt: Showdown! With 8+1+1 functionality

Hoo baby did this one cook my brain to get this working. Turns out the varied combinations of loading methods REALLY adds a lot of complexity to this rifle.

I tried to code this as historically accurate as possible, which includes the ability to load in 8+1+1 configuration.

This rifle is unique in the fact that it has a lifter like a shotgun, and can be effectively ghost loaded like one.

To load, you will need to press down the lifter by pulling the trigger with your hand over the lifter while the bolt is open, and press down with your hand. Once open, you can load 8 rounds + 1 on the lifter and an additional + 1 in the chamber if the lifter is down at this point.

If you load the 9 rounds to fill the magazine plus lifter without loading the + 1 in the chamber, you can also raise the lifter to use that round immediately.

To raise the lifter, you'll need to push the bolt forward a bit, then jerk it back to pop the lifter up. If you take a peek around the bolt you can see down into the lifter area and view if a bullet has popped onto it, indicating the rifle has another round.

There is a lifter lock that can be engaged by pressing the safety button. It will make a click, the lifter switch will move on the right side of the gun, and you will have a single shot rifle with the magazine reserved for when you disengage the lifter lock.

If you want to reload the rifle on the fly, do the following.

Pull the bolt back on live or fired round, ejecting it, then press the lifter down. If the lifter isn't empty, a bullet on the lifter will be pushed back into the magazine and you can top up the mag this way. You'll have to raise the lifter back up and cycle the bolt to rechamber the round.

Rounds are dispensed from the magazine tube when the bolt is rotated down completely, so you can't just push the bolt forward and backward to quickly eject rounds.

I apologize if this description is confusing, my brain is a little cooked from coding this. I've included some YouTube links below to help get an idea of how this gun operates.

A fine ornamental Lebel 1886 rifle, belonging to Reverend Ishim Gird. Never intended for action, Gird keeps it as clean as the day he plucked it from his mantel to kill the first of his congregation to get through the barricade.

  • traditional loading demonstration
  • 8+1+1 loading demonstration

Features

  • Hunt: Showdown sounds
  • Somewhat realistic 8+1+1 loading mode
  • Lifter lock when safety button is used
  • Suppressor Mount
  • W330 Scope Mount
  • Trigger breaks at the trigger click for precision

ObjectID List

  • bitwizrd.HuntFirearm.AltarBoy

Metadata

  • Era: WildWest
  • Year Introduced: 1886
  • ModTags: BitWizrd, Hunt: Showdown

Spawner Menu

  • Firearms/BoltActionRifle

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

Sirdoggy-OtherLoaderPatched

檔案與校驗

檔案名稱
HuntAltarBoy-1.0.5.zip
檔案大小
25.8 MiB