MG60 LMG
MG42 but proto
模組介紹 作者原文
MG60 Lightmachine Gun
The MG60 was an experimental West German LMG made by Rheinmetall as a means to be an improvement of the MG42 with lighter, cheaper and lower rate of fire weapon for the Bundeswehr. It was chambered for 7.62×51mm NATO and used a roller-delayed blowback action, rather than the MG 42’s roller-locked system. Unlike the MG42, the rate of fire was significantly lower between 800-1000 RPM to be much more usable.
The experiment didn't really go anywhere and the Bundeswehr adopted the MG3 anyways.
In order to operate the MG60 properly, remember to lock the bolt back to be able to release the top cover. After firing your belt or box, remains of the linkage can stay, so swipe away, tilt or lift up the feed tray to clear it! And remember to also push your bolt handle forward to avoid mishaps.
Features
- German made MG42 but cheaper and only experimental prototype
- Comes with 50 round belt or 150 round belt box magazine!
- Accept muzzle devices and has hidden rail on the top cover
- Can be found in Firearm > Machine Gun
Note
- Belt can be wonky and might be a bit performance intensive for some machines, this is just why belts aren't used in H3!
Thank you SomeGundamFan and Marcus for the wonderful support!
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝，否則該模組不會生效：