BTR82A
BTR!
模組介紹 作者原文
BTR-82A
"BTR my beloved." -------JerryAr-Offline
An 8 wheel Russian APC with a turret which has 30mm and 7.62mm automatic weapons.
How to drive
Click left side of the body (between first and second wheel),and you will get into the driver seat.
AFTER GETTING INTO THE SEAT, STAY STILL AND LOOK STRAIGHT FORWARD FOR 3 SECONDS!!!!!
grab the steering wheel and hold trigger,
and the car will move forward, press joystick downward to brake.
click the rear area of the top hatch to exit the vehicle.
click the ammo boxes behind driver seat to enter the gunner seat, put your hand near the front control handle and the turret will rotate at your will, click to fire the cannon.
Notice/Issue
If it hit something and got stucked, switch to reverse gear by holding the drive shift and press joystick rearward or rightward,
or you can find something to clip its wheels and you can move the vehicle.
Change Log
0.0.1 Added BTR-82A in Misc-------->Tippytoy.
0.0.2 Added cannon to the turret, grab the left pannel near the driver seat to control the turret.
0.0.3 Fixed shell ejecting direction.Added music in radio near the right seat.
0.0.4 Fixed the interior model and tweaked hinge joint of the cannon to reduce the recoil.
0.0.5 Again some cannon tweak and collider fixing. Added several grab points(mobile), right crew hatch now can be close and open from inside.
1.0.0 Player rotation now follow the vehicle, HUGE THANKS to AngryNoob and his scripts.
1.1.0 H3MP supported!(Cannon not sync tho)
1.1.1 New engine brought more power!
1.1.2 Door sync in H3MP.
1.1.3 Gave BTR the ability to swim.
1.1.4 Tweaked floating script.
1.1.5 Increased propeller power.
1.1.6 Still increasing propeller power and upgraded suspension and faster turning speed in watter, Added gunner seat inside the turret.
1.2.0 Tweaked colliders and floating system to fix the terrible low frame rate.
1.2.1 Fixed floating script sometimes not functioning.
1.2.2 Fixed chambered bullet display issue.
1.3.0 Fixed seat, turret and steeringwheel logic.
1.4.0 Thanks to Danny who get the HIGHLY detailed BTR interior for me! Also improved scripts so may have better performance.
1.5.0 Floating system deleted for performance, some script change.
安裝與使用 安裝：BepInEx 外掛
- 本站下載的壓縮包就是模組本體，通常是 BepInEx 外掛（解壓後得到 .dll 或外掛資料夾）。
- 建議流程：用社群模組管理器（如 r2modman）選中本遊戲後匯入該模組，管理器會自動裝好 BepInEx 前置並處理依賴。
- 手動流程：先在遊戲目錄裝好 BepInEx 載入器，再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
- 啟動遊戲，BepInEx 控制台會列印載入日誌；確認這個模組出現在日誌裡即為安裝成功。
帶「前置依賴」的模組需要一併安裝，否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。
下面這些內容需要先安裝，否則該模組不會生效：