American180OperationalBriefcase

版本 v1.0.0·更新於 2025-09-16

An American-180 in a suitcase, thanks Ian!

模組介紹 作者原文

American-180 Operational Briefcase

When spies and bodyguards needed something hidden, stealthy and loads of BEES, the American-180 cut down and stuffed into a suitcase seems to be the exact thing that they wanted.

Introducing the American-180 Operational Briefcase, with a stack of.22LR firing at obnoxious speed and actually managable recoil, the briefcase was definitely a cool little spy thing. Featured in Forgotten Weapons, the briefcase has a housing to mount the American-180, as well as a large tube laser (it is the older retro days so) and that there is a switch that allows the laser sight to turn on and off, as well as a leather strip like trigger near the handle to engage the firing mechanism.

To operate the suitcase, hold it by the handle and then open the top up (Be advised, you need to hold onto the suitcase or it'll fly off), slap in the pan mag, rack the bolt and do not forget to turn the fire selector to fire on the gun itself as there are no means of controlling it via the handle. Then close the lid, fire away!

The laser sight can also be adjusted to your liking, featuring different colours, off, low and high intensity laser for all operational needs. To adjust, grab and hold onto the laser sight's tip area like you would a normal vanilla laser sight.

For giggles, it accepts suppressors.

A note: Once fired, the case will get sluggish and heavy due to the amount of brass you get, so remember to open up and dump them, realism ahoy!

Features

  • Funky spy suitcase with a cut down American-180 inside!
  • Takes.22LR American-180 mags
  • Has "integrated" laser sight that can be on or off when you hold onto the handle!
  • Can accept suppressor, but why would you?
  • Can be found in Firearms > SMG

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

devyndamonster-OtherLoadercityrobo-OpenScripts2

檔案與校驗

檔案名稱
American180OperationalBriefcase-1.0.0.zip
檔案大小
46.5 MiB