Unify2Min

版本 v1.0.1·更新於 2026-03-18

Unify belt/inserter rate display to per minute (/ min). 傳送帶與分揀器速率統一爲「/ min」。

模組介紹 作者原文

Unify 2 Min

Unify belt and inserter rate displays to "/ min" (per minute) to match the unit used in assemblers, miners, and other facilities.

Features

Converts the following displays from "per second" to "/ min":

  • Belts:
  • Item tooltip hover: "x/s" → "x / min"
  • Belt window (when clicked): "x items/s" → "x / min"
  • Inserters:
  • Item tooltip hover:
  • Regular inserters (Grade 1-3): "x round-trips/s/grid" → "x / min/grid"
  • Container inserter (Grade 4, maxed): "120 items/s" → "7200 / min"
  • Container inserter (Grade 4, not maxed): keeps original display
  • Inserter window (when clicked): "x round-trips/s" → "x / min"
  • Build preview (when placing): "x round-trips/s" → "x / min"
  • Container inserter (maxed): always shows "7200 / min"
  • Container inserter (not maxed): keeps original display

All values are calculated as: original_value × 60

Recommended Companion Mod

[Assembler UI] - This mod displays material consumption and product output rates, also using "/ min" as the unit. Using both mods together provides a consistent experience across all rate displays in the game.

Installation

Place Unify2Min.dll in BepInEx/plugins.

Requirements

  • BepInEx 5.4.x

將遊戲中傳送帶與分揀器的速率顯示統一爲「/ min」(每分鐘),與製造臺、礦機等設施保持一致。

功能

將以下幾處原本以「每秒」顯示的數值轉換爲「/ min」:

  • 傳送帶:
  • 懸停物品提示:「x/s」→「x / min」
  • 點開詳情窗口:「x 貨物每秒」→「x / min」
  • 分揀器:
  • 懸停物品提示:
  • 普通分揀器(1-3級):「x 往返/秒/格」→「x / min/格」
  • 集裝分揀器(4級,滿級):「120 每秒運送貨物」→「7200 / min」
  • 集裝分揀器(4級,未滿級):保持原版顯示
  • 點開詳情窗口:「x 往返/s」→「x / min」
  • 建造預覽(放置時):「x 往返/s」→「x / min」
  • 集裝分揀器(滿級):固定顯示「7200 / min」
  • 集裝分揀器(未滿級):保持原版顯示

所有數值計算方式:原值 × 60

推薦搭配 Mod

[製造臺界面優化 (Assembler UI)] - 該 mod 可顯示製造臺的原料消耗和產品產出速率,單位同樣爲「/ min」。兩個 mod 一起使用可以在遊戲中獲得統一的速率顯示體驗。

安裝

將 Unify2Min.dll 放入 BepInEx/plugins。

依賴

  • BepInEx 5.4.x

安裝與使用 安裝:BepInEx 外掛

  1. 本站下載的壓縮包就是模組本體,通常是 BepInEx 外掛(解壓後得到 .dll 或外掛資料夾)。
  2. 建議流程:用社群模組管理器(如 r2modman)選中本遊戲後匯入該模組,管理器會自動裝好 BepInEx 前置並處理依賴。
  3. 手動流程:先在遊戲目錄裝好 BepInEx 載入器,再把解壓出的 .dll 或外掛資料夾放進 BepInEx/plugins/。
  4. 啟動遊戲,BepInEx 控制台會列印載入日誌;確認這個模組出現在日誌裡即為安裝成功。

帶「前置依賴」的模組需要一併安裝,否則不會載入。功能開關通常在遊戲內或外掛自帶的設定檔裡調整。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

xiaoye97-BepInEx

檔案與校驗

檔案名稱
Unify2Min-1.0.1.zip
檔案大小
91.2 KiB