ViveWandThumbFix

版本 v1.0.1·更新於 2026-07-26

Fixes stuck avatar thumbs after touching the trackpads on HTC Vive Wand controllers in BONELAB PCVR.

模組介紹 作者原文

Vive Wand Thumb Fix

Fixes the BONELAB PCVR issue where the avatar's thumbs remain curled after

touching the trackpads on HTC Vive Wand controllers.

Features

  • The thumb curls when the physical trackpad is touched.
  • The thumb opens again when the trackpad is released.
  • Movement, turning, jumping and trackpad clicks are not remapped.
  • Client-side only; other Fusion players do not need the mod.
  • BoneLib is not required.

Compatibility

  • BONELAB PCVR
  • HTC Vive Wand controllers
  • SteamVR/OpenXR
  • MelonLoader 0.7.0 or newer compatible releases
  • Tested with BONELAB 1.744.58126

This package is not intended for standalone Quest/LemonLoader.

Installation

Mod Manager or r2modman

Install the package normally through your mod manager. MelonLoader is listed

as a required dependency.

Manual installation

  • Install MelonLoader for BONELAB.
  • Close BONELAB.
  • Copy ViveWandThumbFix.dll into BONELAB/Mods.
  • Start SteamVR and BONELAB.

The MelonLoader console should display Vive Wand Thumb Fix v1.0.1.

Uninstallation

Remove ViveWandThumbFix.dll from the BONELAB Mods folder, or uninstall the

package through your mod manager.

Исправление больших пальцев Vive Wand

Исправляет ошибку PCVR-версии BONELAB, из-за которой большие пальцы персонажа

остаются согнутыми после касания тачпадов на контроллерах HTC Vive Wand.

Возможности

  • При касании тачпада большой палец сгибается.
  • После отпускания тачпада большой палец снова разгибается.
  • Ходьба, поворот, прыжок и нажатие тачпада не переназначаются.
  • Мод полностью клиентский; другим игрокам Fusion он не требуется.
  • BoneLib не требуется.

Совместимость

  • BONELAB PCVR
  • Контроллеры HTC Vive Wand
  • SteamVR/OpenXR
  • MelonLoader 0.7.0 и более новые совместимые версии
  • Проверено на BONELAB 1.744.58126

Пакет не предназначен для автономной версии Quest/LemonLoader.

Установка

Mod Manager или r2modman

Установите пакет обычным способом через менеджер модов. MelonLoader указан

как обязательная зависимость.

Ручная установка

  • Установите MelonLoader для BONELAB.
  • Закройте BONELAB.
  • Скопируйте ViveWandThumbFix.dll в папку BONELAB/Mods.
  • Запустите SteamVR и BONELAB.

В окне MelonLoader должна появиться строка Vive Wand Thumb Fix v1.0.1.

Удаление

Удалите ViveWandThumbFix.dll из папки BONELAB Mods либо удалите пакет

через менеджер модов.

Credits

Created for the BONELAB Vive Wand community.

This is an unofficial community mod and is not affiliated with Stress Level

Zero, Valve, HTC or.

安裝與使用 安裝:按包內說明操作

  1. 解壓本站下載的壓縮包,先讀包內的 readme / 說明檔案。
  2. 多數模組依賴遊戲的模組載入器:常見做法是用社群模組管理器(如 r2modman)選中本遊戲安裝,由管理器自動處理載入器與依賴。
  3. 手動安裝時,把模組檔案放進遊戲目錄下對應的 Mod / plugins 資料夾。
  4. 啟動遊戲確認載入成功;帶「前置依賴」的模組需要把依賴一併安裝。

不同模組的安裝位置差異較大,包內說明是最可靠的依據。

前置依賴

下面這些內容需要先安裝,否則該模組不會生效:

LavaGang-MelonLoader

檔案與校驗

檔案名稱
ViveWandThumbFix-1.0.1.zip
檔案大小
83.3 KiB